This project we’re working on is large enough to break into two articles, the first dealing with the parking facilities. When designing for a large multi-story apartment building, one must provide for parking. There is an option of using off-site parking but essentially one needs to own the property and that property must be within a reasonable distance to your building. That said, like on this project, the parking must be incorporated into the basement space.
This is where good architects stand out in my opinion, in that if the structure is right, and aligns with the apartment units above, there is a substantial savings in the avoidance of transfer beams. This is our approach to help lessen the financial burden of providing a parking garage yet do so in a way that doesn’t negatively impact the apartment units on the upper floors, or the retail space.
Continue reading “40 Unit Apartment Building in Brooklyn – PARKING FACILITIES”
A rather special apartment building design by SimpleTwig Architecture.llc, the concept focuses on making the most of the apartment quality, from the moment one steps off the elevator to the moment one sits down on their sofa, the design seeks to maximize living space while minimizing other spaces without compromising quality living.
This article explores the basic layout of the entire apartment floor plan level, which will be supplemented by images of the actual units tomorrow, since we have so much to share on this project. This article also corresponds to two additional articles, one on the parking facilities, and the other on the retail, garden and street level planning of the project. All together, this is how one should make a fully integrated project that makes the most of tenant spaces, provides the community with a special building and provides the owner with a building that is easy to build, maintain and sustain.
Continue reading “New Residential Development in Brooklyn – RESIDENTIAL COMPONENT”
We’re putting the final touches on a 40 unit residential project in Brooklyn. It is pretty special in that the project keeps part of an old theater facade and uses it to announce the retail component of the project, through awnings and little local vendors which can casually set up their wares below the awnings. The extra traffic and attention will be a boost for the anchor tenant who has a commanding view of this important residential corner.
This project is split into 3 articles, released the 8th of September, the 10th and the 12th.
Come on in and we’ll show you around…
Continue reading “New Residential Development in Brooklyn – RETAIL COMPONENT”
For new construction, and in this as other studies to create rental apartments, an Architect is going to be confronted by two likely scenarios, the adjacent buildings have existing party-walls with the property line running through it’s center, or, there are no adjacent buildings and thus new party-walls can be built directly over the property line. In this version of our townhouse plan, we explore the ramifications of an existing party-wall that can not be used as it does not meet earthquake code requirements, or, a new building positioned it’s party-wall completely onto its own property.
This results in slightly less interior space, but also creates a unique situation where the joists can run from the front of the building to the back. The design result, is a 2 bedroom apartment with a huge great room with 3 windows bringing in the light and air, something that most people in New York City, Chicago, Boston or any large city would love to have.
Continue reading “Best Townhouse Plan for New Construction “‘8c’ Independent Party-Wall Prototype””